Brake Assist

If this vehicle has StabiliTrakĀ®, it also has a Brake Assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickly and forcefully applied the brake pedal in an attempt to quickly stop or slow down the vehicle. The stability system hydraulic brake control module increases brake pressure at each corner of the vehicle until the ABS activates.

Minor brake pedal pulsation or pedal movement during this time is normal and the driver should continue to apply the brake pedal as the driving situation dictates The Brake Assist feature will automatically disengage when the brake pedal is released or brake pedal pressure is quickly decreased.

    See also:

    Parking over Things That Burn
    WARNING Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. ...

    Going & Stopping
    The biggest drawback I found with the Yukon was the powertrain. A 380-horsepower, 6.2-liter V-8 is standard in the Denali, but it was sluggish in almost every passing situation I could simulate. T ...

    Shutting the Engine Off After a Remote Start
    To shut off the engine: ○ Press until the parking lamps turn off. ○ Turn on the hazard warning flashers. ○ Insert the key and turn it to ON/ RUN and then back to LOCK/OFF. ...