Electronic Range Select (ERS) Mode

ERS or manual mode allows for the selection of the range of gear positions. Use this mode when driving down hill or towing a trailer to limit the top gear and vehicle speed.

To use this feature:

1. Move the shift lever to M(Manual Mode).
2. Press the plus/minus button on the shift lever, to increase or decrease the gear range available.

See Manual Mode on page 9‑31 for more information.

    See also:

    Traction Control System (TCS)/StabiliTrak® Light
    The TCS/StabiliTrak light comes on briefly when the engine is started. If the light does not come on or stays on, have the vehicle serviced by the dealer. If the system is working normally, the ind ...

    Floor Mats
    WARNING If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stopping dist ...

    Engine Hour Meter Display
    The Driver Information Center (DIC) can also display the number of hours the engine has run. To display the engine hours, turn the ignition off, then press and hold the reset button for at least four ...