See also:

Starting the Engine Using Remote Start
To start the vehicle: 1. Aim the RKE transmitter at the vehicle. 2. Press and release on the RKE transmitter. 3. Immediately after completing Step 2, press and hold until the parking lamps flash. ...

Headlamp Wiring
An electrical overload may cause the lamps to go on and off, or in some cases to remain off. Have the headlamp wiring checked right away if the lamps go on and off or remain off. ...

Stop/Tail/Turn Signal/ Sidemarker Lamp
To replace one of these lamps: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Remove the two screw covers from the taillamp assembly. 3. Remove the two screws securing the taillamp asse ...