Listing Stored Numbers

The list command will list all stored numbers and name tags.

Using the “List” Command

1. Press and hold 2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.” for two seconds.

2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.”

    See also:

    Fuels in Foreign Countries
    Never use leaded gasoline or any other fuel not recommended in the previous text on fuel. Costly repairs caused by use of improper fuel would not be covered by the vehicle warranty. To check the fuel ...

    Engine Hour Meter Display
    The Driver Information Center (DIC) can also display the number of hours the engine has run. To display the engine hours, turn the ignition off, then press and hold the reset button for at least four ...

    Taillamps (Chassis Cab Models)
    A. Backup Lamp B. Stoplamp/Taillamp/Turn Signal Lamp To replace one of these bulbs: 1. Remove the four screws. 2. Lift the lens off the lamp assembly. 3. Turn the old bulb counterclockwise and ...