Changing the RSE Video Screen Settings

The screen display mode (normal, full, and zoom), screen brightness, and setup menu language can be changed from the on screen setup menu. To change any feature:

1. Press the 2. Use the remote control , (display menu) button on the remote control.

2. Use the remote control , ,, (navigation) arrows and the (enter) button to use the setup menu., (navigation) arrows and the (enter) button to use the setup menu., 3. Press the button again to remove the setup menu from the screen. (navigation) arrows and the 3. Press the button again to remove the setup menu from the screen. (enter) button to use the setup menu.

3. Press the Audio Output button again to remove the setup menu from the screen.

    See also:

    Lane Departure Warning (LDW)
    For vehicles with LDW, it is intended to help avoid unintentional lane departures. It may provide a warning if the vehicle is crossing a lane without using a turn signal. LDW uses a camera sensor ...

    Vehicle Messages
    Messages are displayed on the DIC to notify the driver that the status of the vehicle has changed and that some action may be needed by the driver to correct the condition. Multiple messages may appe ...

    Automatic Transmission Shift Lock Control Function Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room aroun ...