Trailer Gain and Output
On vehicles with the Integrated Trailer Brake Control (ITBC) system, the trailer brake display appears in the DIC. Press the trip odometer reset stem until TRAILER GAIN and OUTPUT display.
TRAILER GAIN shows the trailer gain setting. This setting can be adjusted from 0.0 to 10.0 with either a trailer connected or disconnected.
OUTPUT shows the power output to the trailer any time a trailer with electric brakes is connected. Output is displayed in 0 to 10 bars. Dashes may appear in the OUTPUT display.
To adjust trailer gain see “Integrated Trailer Brake Control System” under Towing Equipment on page 9‑100 for more information.
See also:
Electronic Transfer Case
The transfer case knob is located next to the steering column.
Use the dial to shift into and out of four-wheel drive. ...
Towing the Vehicle From the Rear
Notice: Towing the vehicle from the rear could damage it. Also, repairs would
not be covered by the vehicle warranty. Never have the vehicle towed from the rear. ...
Turning the System On and Off
The URPA system can be turned on and off using the infotainment system controls.
See Vehicle Personalization on page 5‑33 for more information.
When the system is off, PARK ASSIST OFF display ...