Trailer Gain and Output
On vehicles with the Integrated Trailer Brake Control (ITBC) system, the trailer brake display appears in the DIC. Press the vehicle information button until TRAILER GAIN and OUTPUT display.
TRAILER GAIN shows the trailer gain setting. This setting can be adjusted from 0.0 to 10.0 with either a trailer connected or disconnected.
OUTPUT shows the power output to the trailer any time a trailer with electric brakes is connected. Output is displayed in 0 to 10 bars. Dashes may appear in the OUTPUT display.
To adjust trailer gain see “Integrated Trailer Brake Control System” under Towing Equipment on page 9‑100 for more information.
See also:
Electronic Transfer Case
The transfer case knob is located next to the steering column.
Use the dial to shift into and out of four-wheel drive. ...
Tire Chains
WARNING Do not use tire chains. There is not enough clearance. Tire chains used
on a vehicle without the proper amount of clearance can cause damage to the brakes,
suspension or other vehicle part ...
Increasing Speed While Using Cruise Control
If the cruise control system is already activated, . Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it.
• To increase vehicle speed in small a ...