Antilock Brake System (ABS) Warning Light
For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started.
If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light then goes off.
If the ABS light stays on, turn the ignition off. If the light comes on while driving, stop as soon as it is safely possible and turn the ignition off. Then start the engine again to reset the system. If the ABS light stays on, or comes on again while driving, the vehicle needs service.
If the regular brake system warning light is not on, the vehicle still has brakes, but not antilock brakes.
If the regular brake system warning light is also on, the vehicle does not have antilock brakes and there is a problem with the regular brakes.
See Brake System Warning Light on page 5‑27.
For vehicles with a Driver Information Center (DIC), see Brake System Messages on page 5‑43 for all brake-related DIC messages.
If the vehicle is a hybrid, see the hybrid supplement for more information.
See also:
Passenger Safety Belt Reminder Light
When the vehicle is started, this light flashes and a chime may come on to remind
front passengers to fasten their safety belt. Then the light stays on solid until
the belt is buckled.
For more ...
Safety
The National Highway Traffic Safety Administration gave the 2007 Yukon a
five-star frontal crash-test rating; it hasn't done a side-impact test as of
this writing. Rollover ratings were listed at ...
Order of Play
Compressed audio files are accessed in the following order:
• Playlists.
• Files stored in the root directory.
• Files stored in folders in the root directory.
Tracks are played in the follo ...