Trip Odometer
The trip odometer shows how far the vehicle has been driven since the trip odometer was last set to zero.
Press the reset button, located on the instrument panel cluster next to the voltmeter, to toggle between the trip odometer and the regular odometer. Holding the reset button for approximately one second while the trip odometer is displayed will reset it.
To display the odometer reading with the ignition off, press the reset button.
See Driver Information Center (DIC) on page 5‑33 for more information.
See also:
Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your de ...
Ending Cruise Control
There are three ways to end cruise control:
• Step lightly on the brake pedal.
• Press the button.
• To turn off the cruise control, press on the steering wheel. ...
Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps
To replace one of these bulbs:
1. Open the tailgate. See Tailgate on page 2‑10 for more information.
2. Remove the two rear lamp assembly screws near the tailgate latch strikerpost and pull ...