Canceling a Remote Start

To cancel a remote start:

• Aim the RKE transmitter at the vehicle and press and hold • Turn on the hazard warning flashers. until the parking lamps turn off.

• Turn on the hazard warning flashers.

• Turn the ignition on and then back off.

    See also:

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the tires or replacing one or more of the TPMS sensors. The T ...

    Battery Voltage and Charging Messages
    BATTERY LOW START VEHICLE When the vehicle’s battery is severely discharged, this message will display and four chimes will sound. Start the vehicle immediately. If the vehicle is not started and t ...

    Compass Calibration
    The compass can be manually calibrated. Only calibrate the compass in a magnetically clean and safe location, such as an open parking lot, where driving the vehicle in circles is not a danger. It is ...