OnStar Overview

If equipped, this vehicle has a comprehensive, in-vehicle system that can connect to a live Advisor for Emergency, Security, Navigation, Connection, and Diagnostic Services.

If equipped, this vehicle has a comprehensive, in-vehicle system that can connect to a live Advisor for Emergency, Security, Navigation, Connection, and Diagnostic Services.

The OnStar system status light is next to the OnStar buttons. If the status light is:
• Solid Green: System is ready.
• Flashing Green: On a call.
• Red: Indicates a problem.

Push Push to: or call 1-888-4-ONSTAR (1-888-466-7827) to speak to an Advisor.

Push • Make a call, end a call, or answer an incoming call. to:
• Make a call, end a call, or answer an incoming call.
• Give OnStar Hands-Free Calling voice commands.
• Give OnStar Turn-by-Turn Navigation voice commands.
Requires the available Directions and Connections service plan.

Push • Verify account information or update contact information. to connect to a live Advisor to:
• Verify account information or update contact information.
• Get driving directions. Requires the available Directions and Connections service plan.
• Receive On-Demand Diagnostics for a check on the vehicle’s key operating systems.
• Receive Roadside Assistance.

Push connection to an Emergency Advisor available 24/7 to: to get a priority connection to an Emergency Advisor available 24/7 to:
• Get help for an emergency.
• Be a Good Samaritan or respond to an AMBER Alert.
• Get crisis assistance and evacuation routes.

    See also:

    Trailer Gain and Output
    On vehicles with the Integrated Trailer Brake Control (ITBC) system, the trailer brake display appears in the DIC. Press the vehicle information button until TRAILER GAIN and OUTPUT display. TRAILER ...

    If No Steam is Coming from the Engine Compartment
    If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious. Sometimes the engine can get a little too hot when the vehicle: ○ Climbs a ...

    Starting the Engine Using Remote Start
    To start the vehicle: 1. Aim the RKE transmitter at the vehicle. 2. Press and release on the RKE transmitter. 3. Immediately after completing Step 2, press and hold until the parking lamps flash. ...