See also:

Starting Procedure
1. With your foot off the accelerator pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as your engine gets warm. Do not race the engine imm ...

Button Retainer
Floor mats with a button-type retainer. Removing and Replacing the Floor Mat 1. Pull up on the rear of the mat to unlock and remove. 2. Reinstall the floor mat by lining up the floor mat openings ...

Hot Check Procedure
Use this procedure to check the transmission fluid level when the transmission fluid temperature is between 71°C and 93°C (160°F and 200°F). The hot check is the most accurate method to check the ...