Bluetooth

For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing:
• Placement and receipt of calls in a hands-free mode.
• Sharing of the cell phone’s address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked:
• Become familiar with the features of the cell phone.
Organize the phone book and contact lists clearly and delete duplicate or rarely used entries.
If possible, program speed dial or other shortcuts.
• Review the controls and operation of the infotainment system.
• Pair cell phone(s) to the vehicle.
The system may not work with all cell phones. See “Pairing” in this section for more information.
• If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list.
See “Voice Pass-Thru” in this section for more information.
• See “Storing and Deleting Phone Numbers” in this section for more information.

WARNING
When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment (navigation) system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death.

Focus your attention on driving.

A Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The system can be used while the key is in the ON/RUN or ACC/ACCESSORY position. The range of the Bluetooth system can be up to 9.1 m (30 ft).

Not all phones support all functions, and not all phones work with the in-vehicle Bluetooth system.

See www.gm.com/bluetooth for more information on compatible phones.

    See also:

    Dome Lamps
    The dome lamps are located in the overhead console. They come on when any door is opened and turn off after all the doors are closed. Turn the instrument panel brightness knob located below the dome ...

    Starting the Vehicle
    1. Press and release on the Remote Keyless Entry transmitter. 2. Press and hold for about two seconds. The turn signal lamps will briefly flash to confirm the vehicle has been started. The pa ...

    Ignition Positions
    The ignition switch has four different positions. In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied. Notice: Using a tool to fo ...