High-Beam On Light

The high-beam on light comes on when the high-beam headlamps are in use.

The high-beam on light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer on page 6‑2 for more information.

    See also:

    Hot Check Procedure
    Use this procedure to check the transmission fluid level when the transmission fluid temperature is between 71°C and 93°C (160°F and 200°F). The hot check is the most accurate method to check the ...

    Canceling a Remote Start
    To cancel a remote start: • Aim the RKE transmitter at the vehicle and press and hold until the parking lamps turn off. • Turn on the hazard warning flashers. • Turn the ignition switch on ...

    Bulb Replacement
    For the proper type of replacement bulbs, see Replacement Bulbs on page 10‑29. For any bulb-changing procedure not listed in this section, contact your dealer. ...