Easy Exit Driver Seat

This feature can move the seat rearward to allow extra room to exit the vehicle.

The vehicle must be in P (Park). (Easy Exit Driver Seat): Press to recall the easy exit seat position.

The vehicle must be in P (Park).

If the easy exit seat feature is programmed on in the vehicle personalization menu, automatic seat movement occurs when the ignition key is removed.

A single beep sounds. The driver seat moves back approximately 8 cm (3 in). To move the seat back farther, press seat is all the way back. again until the seat is all the way back.

If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.

See Vehicle Personalization (With DIC Buttons) on page 5‑46 for more information.

    See also:

    Front Fog Lamp Light
    The front fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps on page 6‑4 for more information. ...

    StabiliTrak® Indicator Light
    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light goes off. If it stays on, or ...

    Under the Hood
    GM's two-mode hybrid system enables "full" hybrid operation with the capability to cruise on electric power up to 30 mph. The gas engine kicks in if more acceleration is needed, as well ...