Storing Memory Positions
To save into memory:
1. Adjust the driver seat, seatback recliner, and both outside mirrors.
See Power Mirrors on page 2‑16 for more information.
Not all vehicles will have the ability to save and recall the mirror positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park).
A single beep will sound. The seat and outside mirrors will move to the position previously stored for the identified driver.
See also:
California Perchlorate Materials Requirements
Certain types of automotive applications, such as airbag initiators, seat belt
pretensioners, and lithium batteries contained in Remote Keyless Entry transmitters,
may contain perchlorate material ...
High-Beam On Light
This light comes on when the high-beam headlamps are in use.
See Headlamp High/Low-Beam Changer on page 6‑3 for more information. ...
Entering the Feature Settings Menu
1. Turn the ignition on and place the vehicle in P (Park).
To avoid excessive drain on the battery, turn the headlamps off.
2. Press the customization button to scroll through the available customiz ...