Programming the Power Windows
If the battery on the vehicle has been recharged, disconnected, or replaced, windows with the express-up feature need to be reprogrammed for this feature to work. To program the window:
1. Close all doors with the ignition in the ACC/ACCESSORY, ON/RUN position, or when Retained Accessory Power (RAP) is active.
See Retained Accessory Power (RAP) on page 9‑20.
2. Press and continue to hold the window switch until the window is fully open.
3. Pull up and hold the window switch to close the window.
Continue to hold it briefly after the window is fully closed.
4. Repeat for each window that has the express-up feature.
See also:
Shifting Out of Neutral
To shift the transfer case out of N (Neutral) do the following:
1. Set the parking brake and apply the regular brake pedal.
2. Turn the ignition to ON/RUN with the engine off, and shift the transmis ...
Lap-Shoulder Belt
All seating positions in the vehicle have a lap-shoulder belt.
The following instructions explain how to wear a lap-shoulder belt properly.
1. Adjust the seat, if the seat is adjustable, so you can ...
Engine Hours
To display the ENGINE HOURS, place the ignition in LOCK/OFF or ACC/ACCESSORY, then press and hold the trip odometer reset stem for four seconds while viewing the ODOMETER. This display shows the total ...