Storing a Flat or Spare Tire and Tools
WARNING
Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.
To store the flat tire:

1. Remove the cable package. The cable is stored in a plastic bag under the compact spare tire.
2. Remove the small center cap by tapping the back of the cap with the extension of the shaft, if the vehicle has aluminum wheels.
3. Put the flat tire in the rear storage area with the valve stem pointing toward the rear of the vehicle.

A. Cable
B. Liftgate Hinges
C. Center of the Wheel
D. Door Striker
4. Pull the cable (A) through the door striker (D) then the center of the wheel (C).

5. Hook the cable onto the outside portion of the liftgate hinges (B).
6. Hook the other end of the cable onto the outside portion of the liftgate hinge
on the other side of the vehicle.
7. Pull on the cable to make sure it is secure.

8. Make sure the metal tube is centered at the striker. Push the tube toward the front of the vehicle.
9. Close the liftgate and make sure it is latched properly.
The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can.
See also:
Oil Pressure
This display shows the oil pressure in either kilopascals (kPa) or pounds per square inch (psi). ...
Maintenance When Trailer Towing
The vehicle needs service more often when pulling a trailer. See this manual's
Maintenance Schedule or Index for more information. Things that are especially important
in trailer operation are ...
Low Fuel Warning Light
This light, under the fuel gauge, comes on briefly while the engine is being started.
This light and a chime, if the vehicle is equipped with a radio, comes on when the fuel tank is low on fuel.
T ...





