Fog Lamps
To replace one of these bulbs:
1. Locate the fog lamp assembly under the front facia.
2. Disconnect the bulb socket from the electrical connector, turn, and pull out the bulb assembly.
3. Remove the old bulb from the bulb socket and push the new bulb straight into the bulb socket until it connects.
4. Push the bulb socket into the fog lamp assembly and turn clockwise to lock it into place.
5. Reconnect the bulb socket to the electrical connector.
See also:
Cargo Box & Towing
One benefit of the Canyon's low ride height is that the cargo box is very
accessible. Whether you have to lift something over the side of the box or load
something with the tailgate down, the low- ...
Before Driving Off-Road
○ Have all necessary maintenance and service work completed.
○ Fuel the vehicle, fill fluid levels, and check inflation pressure in all tires,
including the spare, if equipped.
○ ...
Leaving the Vehicle With the Engine Running
WARNING
It can be dangerous to leave the vehicle with the engine running.
The vehicle could move suddenly if the shift lever is not fully in P (Park) with the parking brake firmly set.
If you have ...