Starter Switch Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the vehicle.
2. Firmly apply both the parking brake and the regular brake. See Parking Brake
on page 9‑33.> Do not use the accelerator pedal, and be ready to turn off the engine
immediately if it starts.> 3. Try to start the engine in each gear. The vehicle
should start only in P (Park) or N (Neutral). If the vehicle starts in any other
position, contact your dealer for service.
See also:
Reading Lamps
Press the button near each lamp to turn them on or off.
For more information, see:
• Dome Lamps on page 6‑5.
• Instrument Panel Illumination Control on page 6‑5. ...
Manual Trailer Brake Apply
The Manual Trailer Brake Apply Lever is located on the Trailer Brake Control Panel and is used to apply the trailer’s electric brakes independent of the vehicle’s brakes.
This lever is used in th ...
Transmission
Electronic Range Select (ERS) Mode
ERS mode allows you to choose the top-gear limit of the transmission and the vehicle's speed while driving downhill or towing a trailer.
The vehicle has an electro ...