Adding Washer Fluid

Open the cap with the washer symbol on it and add washer fluid until full. See

Open the cap with the washer symbol on it and add washer fluid until full. See Engine Compartment Overview on page 10‑6 for reservoir location.

Notice

○ When using concentrated washer fluid, follow the manufacturer's instructions for adding water.
○ Do not mix water with ready-to-use washer fluid. Water can cause the solution to freeze and damage the washer fluid tank and other parts of the washer system. Also, water does not clean as well as washer fluid.
○ Fill the washer fluid tank only three-quarters full when it is very cold. This allows for fluid expansion if freezing occurs, which could damage the tank if it is completely full.
○ Do not use engine coolant (antifreeze) in the windshield washer. It can damage the windshield washer system and paint.

    See also:

    Total Weight on the Vehicle's Tires
    Inflate the vehicle's tires to the upper limit for cold tires. These numbers can be found on the Certification label or see Vehicle Load Limits on page 9‑10 for more information. Do not go over ...

    Service Parts Identification Label
    This label, on the inside of the glove box, has the following information: • Vehicle Identification Number (VIN). • Model designation. • Paint information. • Production options and special ...

    Memory Features
    On vehicles with the memory feature, the “1” and “2” buttons on the outboard side of the driver seat are used to manually save and recall the driver seat and outside mirror positions. Th ...