Engine Cover
Engine Cover 3.0L V6
A. Oil Fill Cap
B. Engine Cover Bolt
C. Engine Cover
To remove:
1. Remove the oil fill cap (A).
2. Remove the engine cover bolt (B).
3. Raise the engine cover (C) to release from the retainers.
4. Lift and remove the engine cover.
5. Reverse Steps 1 through 4 to reinstall engine cover.
See also:
Shifting out of Park
The vehicle is equipped with an electronic shift lock release system.
The shift lock release is designed to:
• Prevent ignition key removal unless the shift lever is in P (Park) with the shift lev ...
Instrument Panel Fuse Block
The instrument panel fuse block access door is located on the driver side edge of the instrument panel.
Pull off the cover to access the fuse block.
The vehicle may not be equipped with all of t ...
Power Seat Adjustment
To adjust a power seat, if equipped:
• Move the seat forward or rearward by sliding the control forward or rearward.
• If available, raise or lower the front or rear part of the seat cushion b ...