Cruise Control Messages
APPLY BRAKE BEFORE CRUISE
If this message displays when attempting to activate cruise control, apply the brake pedal and try again.
CRUISE SET TO XXX
This message displays when the cruise control is set and shows the speed it was set to. See Cruise Control on page 9‑38 for more information.
See also:
Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks. ...
Adjusting the Speakers (Balance/Fade) (AM-FM Radio and AM-FM Radio with CD)
To adjust the balance or fade:
1. Press or press the
knob until the speaker control label displays.
2. To adjust the setting, do one of the following:
• Turn the knob.
• Press either SEEK ...
Instrument Panel Fuse Block
The instrument panel fuse block is located under the instrument panel on the passenger side of the vehicle. Pull down on the cover to access the fuse block.
Fuse Side
The vehicle may not be equipp ...