Brake System Warning Light
The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working
The brake indicator light should come on briefly as the engine is started. If it does not come on have the vehicle serviced by your dealer. When the ignition is on, the brake system warning light comes on when the parking brake is set. The light stays on if the parking brake does not fully release. If it stays on after the parking brake is fully released, there is a brake problem. Have the brake system inspected immediately.
WARNING
The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.
If the light comes on while driving, a chime sounds. Pull off the road and stop. The pedal might be harder to push or go closer to the floor. It might also take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle on page 10‑79.
See also:
Object Detection System Messages
PARK ASST (Assist) BLOCKED SEE OWNERS MANUAL
This message displays if there is something interfering with the park assist system. See Ultrasonic Parking Assist on page 9‑34 for more information ...
Symbols
The RVC system may have a feature that lets the driver view symbols on the radio
screen while using the RVC. The Ultrasonic Rear Park Assist (URPA) system must not
be disabled to use the caution s ...
FM
FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has
a built-in electronic circuit that automatically works to reduce interference, some
static can occur, especially aroun ...