Conditions in Which Remote Start Will Not Work
The remote vehicle start feature will not operate if:
○ The key is in the ignition.
○ The hood or doors are not closed.
○ The hazard warning flashers are on.
○ There is an emission control system malfunction.
○ The engine coolant temperature is too high.
○ The oil pressure is low.
○ Two remote vehicle starts have already been used.
○ The vehicle is not in P (Park).
See also:
Tow/Haul Mode
Tow/Haul assists when pulling a heavy trailer or a large or heavy load. The purpose of the Tow/Haul mode is to:
• Reduce the frequency and improve the predictability of transmission shifts.
• Pr ...
Remote Keyless Entry (RKE) System
The RKE transmitter is used to remotely lock and unlock the doors from up to 60 m (195 ft) away from the vehicle.
Press
to unlock the driver door.
Press
again within five seconds to unlock a ...
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park ...





