How to Check
Use a good quality pocket-type gauge to check tire pressure.
Proper tire inflation cannot be determined by looking at the tire.
Check the tire inflation pressure when the tires are cold, meaning the vehicle has not been driven for at least three hours or no more than 1.6 km (1 mi).
Remove the valve cap from the tire valve stem. Press the tire gauge firmly onto the valve to get a pressure measurement.
If the cold tire inflation pressure matches the recommended pressure on the Tire and Loading Information label, no further adjustment is necessary.
If the inflation pressure is low, add air until the recommended pressure is reached. If the inflation pressure is high, press on the metal stem in the center of the tire valve to release air.
Re-check the tire pressure with the tire gauge.
Return the valve caps on the valve stems to prevent leaks and keep out dirt and moisture.
See also:
Engine Exhaust
WARNING
Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death.
Exhaust may enter the vehicle if:
• The vehicle idle ...
Loading the Vehicle for Off-Road Driving
WARNING
• Unsecured cargo on the load floor can be tossed about when driving over rough terrain. You or your passengers can be struck by flying objects. Secure the cargo properly.
• Keep cargo i ...
Brakes
This vehicle has front disc brakes and could have rear drum brakes or rear disc brakes.
Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are wo ...