Wiper Blade Replacement

Windshield wiper blades should be inspected for wear or cracking. See Maintenance Schedule on page 11‑3 for more information on wiper blade inspection.

Replacement blades come in different types and are removed in different ways. To remove the wiper blade:

1. Pull the windshield wiper arm connector away from the windshield.

2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector.

2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector.

3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.

3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.

For the proper type and size, see Maintenance Replacement Parts on page 11‑15.

    See also:

    Finding a Station
    To select the band, see “Audio Source” earlier in this section. Turn the MENU/SEL knob to find a radio station. To select a preset station, touch the FAV button and choose a preset station. Se ...

    Lockout Protection
    If the driver side power door lock switch is pressed when the driver door is open and the key is in the ignition, all of the doors will lock and then the driver door will unlock. If the passenger sid ...

    Tire Pressure
    Tires need the correct amount of air pressure to operate effectively. Notice: Neither tire underinflation nor overinflation is good. Underinflated tires, or tires that do not have enough air, can r ...