How to Check Lubricant
2500HD with 6.0 L
All Other Series and Engines
To get an accurate reading, the vehicle should be on a level surface.
• For all 4.3 L, 4.8 L and 5.3 L 1500 Series applications, the proper level is 1.0mm to 19.0mm (0.04 in to 0.7 in) below the bottom of the fill hole, located on the rear axle. Add only enough fluid to reach the proper level.
• For all 6.0 L and 6.2 L 1500 Series applications, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the fill plug hole, located on the rear axle. Add only enough fluid to reach the proper level.
• For all 6.0 L 2500HD Series applications, the proper level is from 0mm to 13mm (0 to 0.5 in) below the bottom of the fill plug hole, located on the rear axle.
Add only enough fluid to reach the proper level.
• For all 6.6 L Duramax Diesel 2500HD Series applications and all 3500 Series applications, the proper level is from 17mm to 21mm (0.6 in to 0.8 in) below the bottom of the fill plug hole, located on the rear axle. Add only enough fluid to reach the proper level.
See also:
Radio Data System (RDS)
For radios with the Radio Data System (RDS) feature, it only works with FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only ...
Fuel Range
Press the trip/fuel button until FUEL RANGE displays. This display shows the approximate number of remaining kilometers (km) or miles the vehicle can be driven without refueling. The display will show ...
Diagnostics
OnStar Vehicle Diagnostics will perform a vehicle check every month. It will check the engine, transmission, antilock brakes, and major vehicle systems. It also checks the tire pressures, if the vehic ...