When to Check and Change Automatic Transmission Fluid
It is usually not necessary to check the transmission fluid level.
The only reason for fluid loss is a transmission leak or overheated transmission. If a small leak is suspected, then use the following checking procedures to check the fluid level. However, if there is a large leak, then it may be necessary to have the vehicle towed to a dealer service department and have it repaired before driving the vehicle further.
Notice: Use of the incorrect automatic transmission fluid may damage the vehicle, and the damages may not be covered by the vehicle warranty. Always use the automatic transmission fluid listed in Recommended Fluids and Lubricants on page 11‑12.
Change the fluid and filter at the scheduled maintenance intervals listed in Maintenance Schedule on page 11‑3. Be sure to use the transmission fluid listed in Recommended Fluids and Lubricants on page 11‑12.
See also:
Air Vents
Use the air outlets, located in the center and on the side of the instrument
panel, to direct the airflow. Use the thumbwheels located near the center air outlets,
to open or close off the airflow ...
Emissions Inspection and Maintenance Programs
Some local governments may have programs to inspect the on-vehicle emission control
equipment. For the inspection, the emission system test equipment is connected to
the vehicle’s Data Link Conn ...
Replacement Bulbs
For replacement bulbs not listed here, contact your dealer. ...