Manual Trailer Brake Apply
The Manual Trailer Brake Apply Lever is located on the Trailer Brake Control Panel and is used to apply the trailer’s electric brakes independent of the vehicle’s brakes.
This lever is used in the Trailer Gain Adjustment Procedure to properly adjust the power output to the trailer brakes. Sliding the lever to the left will apply only the trailer brakes.
The power output to the trailer is indicated in the Trailer Brake Display Page on the DIC. If the vehicle’s service brakes are applied while using the Manual Trailer Brake Apply Lever, the trailer output power will be the greater of the two.
The trailer's and the vehicle's brake lamps will come on when either vehicle braking or manual trailer brakes are applied.
See also:
Crew Cab
A. Open or Close
B. Vent
On vehicles with a sunroof, the sunroof only operates when the ignition is in the ACC/ACCESSORY or ON/RUN or the Retained Accessory Power (RAP) is active.
See Retained Ac ...
What to Use
Read the manufacturer's instructions before refilling the windshield washer fluid.
If operating the vehicle in an area where the temperature may fall below freezing,
use a fluid that has suffi ...
Windshield Wiper/Washer
Windshield Wiper/Washer
The front wiper control is located on the turn and lane-change lever.
The windshield wipers are controlled by turning the band with
on it.
: For a single wipe, turn to ...