Turning the System On and Off
The URPA system can be turned on and off using the rear park aid disable button located next to the radio.

The indicator light comes on when the system is disabled and turns off when the system is on.
When the system is off, PARK ASSIST OFF displays on the Driver Information Center (DIC). The message disappears after a short period of time.
URPA defaults to the on setting each time the vehicle is started.
Notice: If you use URPA while the tailgate is lowered, it may not detect an object behind your vehicle, and you might back into the object and damage your vehicle. Always verify the tailgate is closed when using URPA or turn off URPA when driving with the tailgate lowered.
See also:
Remote Keyless Entry (RKE) System
See Radio Frequency Statement on page 13‑21 for information regarding Part 15
of the Federal Communications Commission (FCC) rules and Industry Canada Standards
RSS-GEN/210/220/310.
If ther ...
Tow/Haul Mode Light
For vehicles with the Tow/Haul Mode feature, this light comes on when the Tow/Haul Mode has been activated.
For more information, see Tow/Haul Mode on page 9‑42. ...
Top Tether Anchor
A top tether (A, C) anchors the top of the child restraint to the vehicle.
A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top te ...





