Brake Assist
If this vehicle has StabiliTrak®, it also has a Brake Assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickly and forcefully applied the brake pedal in an attempt to quickly stop or slow down the vehicle. The stability system hydraulic brake control module increases brake pressure at each corner of the vehicle until the ABS activates.
Minor brake pedal pulsation or pedal movement during this time is normal and the driver should continue to apply the brake pedal as the driving situation dictates The Brake Assist feature will automatically disengage when the brake pedal is released or brake pedal pressure is quickly decreased.
See also:
Reclining the Seatbacks
To recline the seatback:
1. Leaning forward in the seat, pull the reclining seatback strap (B).
2. Move the seatback to the desired position, and then release the strap to lock the seatback in place ...
Sunroof
On vehicles with a sunroof, the switches used to operate it are on the headliner
above the rearview mirror. The ignition must be in ON/ RUN or ACC/ACCESSORY, or
in Retained Accessory Power (RAP) t ...
Canceling a Remote Start
To cancel a remote start:
• Aim the RKE transmitter at the vehicle and press and hold
until the parking lamps turn off.
• Turn on the hazard warning flashers.
• Turn the ignition on and t ...