Parking Brake

To set the parking brake, hold the regular brake pedal down, then push the parking

To set the parking brake, hold the regular brake pedal down, then push the parking brake pedal down.

If the ignition is on, the brake system warning light will come on. See Brake System Warning Light on page 5‑16.

To release the parking brake, hold the regular brake pedal down, then push down momentarily on the parking brake pedal until you feel the pedal release. Slowly pull your foot up off the park brake pedal.

    See also:

    Removing the Spare Tire
    The compact spare tire is located under the vehicle, in front of the rear bumper. See Compact Spare Tire on page 10‑77 for more information. A. Rear Convenience Center B. Wrench (Three-Piece ...

    General Towing Information
    Only use towing equipment that has been designed for the vehicle. Contact your dealer or trailering dealer for assistance with preparing the vehicle for towing a trailer. See the following trailer t ...

    Replacing LATCH System Parts After a Crash
    WARNING A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure ...