Loading Points

A. Primary Load Points
A. Primary Load Points
B. Secondary Load Areas
C. Cargo Management Option Holes

Structural members (A) and (B) are included in the pick-up box design.

Additional accessories should use these load points. Depending on the accessory design, use a spacer under the accessory at the load points to remove gap. The holes for the Cargo Management System (C) are not intended for attachment of aftermarket equipment. See www.gmupfitter.com for additional pick-up box load bearing structural information.

    See also:

    Power Liftgate
    On vehicles with a power liftgate, the vehicle must be in P (Park) to operate. The taillamps flash when the power liftgate moves. WARNING You or others could be injured if caught in the path of th ...

    Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
    To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning fl ...

    Express Down Windows
    Windows that have the express&-down feature allow the windows to be lowered without holding the switch. Press the window switch fully and release it to activate the express&-down feature. ...