CD/DVD Player Messages
Disc Format Error: This message displays if the disc is inserted with the disc label wrong side up, or if the disc is damaged.
Disc Region Error: This message displays if the disc is not from a correct region.
No Disc Inserted: This message displays if no disc is present when the
or DVD/CD AUX button is pressed on the radio.
Optical Error: This message displays if the disc was inserted upside down.
Disk Read Error: This message displays if a disc was inserted with an invalid or unknown format.
Player Error: This message displays if there are disc load or disc eject problems.
• It is very hot. When the temperature returns to normal, the disc should play.
• The road is very rough. When the road becomes smoother, the disc should play.
• The disc is dirty, scratched, wet, or upside down.
• The air is very humid. If so, wait about an hour and try again.
• There was a problem while burning the disc.
• The label is caught in the CD/ DVD player.
If the disc is not playing correctly, for any other reason, try a known good disc.
If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If the radio displays an error message, write it down and provide it to your dealer when reporting the problem.
See also:
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs
to be matched to a new tire/wheel position after rotating the tires or replacing
one or more of the TPMS sensors. T ...
Power Door Locks
There is a power door lock switch on the instrument panel.
There are power door lock switches on the front door panels.
Q : Press to lock the doors.
K : Press to unlock the doors.
When locking ...
Safety Belts
Refer to the following sections for important information on how to use safety
belts properly:
○ Safety Belts on page 3‑12.
○ How to Wear Safety Belts Properly on page 3‑ ...





