Stopping and Resuming Playback
To stop playing a DVD without turning off the system, press the
button on the remote control, or press the softkey located under the
or the
tabs displayed on the radio. If the radio is sourced to something other than DVD-V, press the DVD/CD AUX button to make DVD-V the active source.
To resume DVD playback, press the
button on the remote control, or press the softkey located under the
tab on the radio. The DVD should resume play from where it last stopped if the disc has not been ejected and the stop button has not been pressed twice on the remote control. If the disc has been ejected or the stop button has been pressed twice on the remote control, the disc resumes playing at the beginning of the disc.
See also:
Underbody Maintenance
Use plain water to flush dirt and debris from the vehicle's underbody.
Your dealer or an underbody car washing system can do this. If not removed, rust and corrosion can develop. ...
Programming the Power Windows
If the battery on the vehicle has been recharged, disconnected, or replaced, windows with the express-up feature need to be reprogrammed for this feature to work. To program the window:
1. Close all ...
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press and release
.
3. Immediately after completing Step 2, press and hold
until the turn signal lamps flash.
When the vehicle starts, the parking ...





