AM-FM Radio and AM-FM Radio with CD Player

To set the clock:

1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press the 2. Press the  button until the hour numbers begin to flash, then turn the  knob to increase or decrease the hour. button to turn the radio on.

2. Press the 3. Press the  button until the minute numbers begin to flash, then turn the  knob to increase or decrease the minutes. button until the hour numbers begin to flash, then turn the 3. Press the  button until the minute numbers begin to flash, then turn the  knob to increase or decrease the minutes. knob to increase or decrease the hour.

3. Press the 4. Press the  button until the 12HR or 24HR time format begins to flash, then turn the  knob to change the time format. button until the minute numbers begin to flash, then turn the 4. Press the  button until the 12HR or 24HR time format begins to flash, then turn the  knob to change the time format. knob to increase or decrease the minutes.

4. Press the 5. Press the  button again until the clock display stops flashing to set the currently displayed time, or wait until the flashing stops after five seconds and the current time displayed automatically sets. button until the 12HR or 24HR time format begins to flash, then turn the 5. Press the  button again until the clock display stops flashing to set the currently displayed time, or wait until the flashing stops after five seconds and the current time displayed automatically sets. knob to change the time format.

5. Press the MP3 Radios with a Single CD or a Single CD and DVD button again until the clock display stops flashing to set the currently displayed time, or wait until the flashing stops after five seconds and the current time displayed automatically sets.

    See also:

    Climate Controls
    A. Fan Control B. Temperature Control C. Air Delivery Mode Control D. Air Conditioning E. REAR (Rear Climate Control) F. Recirculation G. Rear Window Defogger Dual Automatic Climate Control S ...

    Using the Tire Sealant and Compressor Kit without Sealant to Inflate a Tire (Not Punctured)
    To use the air compressor to inflate a tire with air only and not sealant: If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning fl ...

    High-Beam On Light
    The high&-beam on light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 6‑2 for more information. ...