Replacing Safety Belt System Parts after a Crash
WARNING
A crash can damage the safety belt system in the vehicle.
A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
After a minor crash, replacement of safety belts may not be necessary.
But the safety belt assemblies that were used during any crash may have been stressed or damaged.
See your dealer to have the safety belt assemblies inspected or replaced.
New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.
Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light on page 5‑20.
See also:
Driver Information Center (DIC)
The DIC display is located at the bottom of the instrument panel cluster. It shows the status of many vehicle systems and enables access to the personalization menu.
The DIC buttons are located on ...
How to Detect a Tamper Condition
If is pressed and the horn sounds,
an attempted break-in has occurred while the system was armed.
If the alarm has been activated, the THEFT ATTEMPTED message will appear on the
DIC. See Key and ...
New Vehicle Break-In
Notice: The vehicle does not need an elaborate break-in. But it will perform
better in the long run if you follow these guidelines:
○ Do not drive at any one constant speed, fast or slow, for ...