Lap Belt (Crew and Extended Cab)
This section is only for the lap belt.
To learn how to wear a lap-shoulder belt, see Lap-Shoulder Belt on page 3‑15.
Your vehicle may have a center seating position. When you sit in the center front seating position, you have a lap safety belt, which has no retractor.
To make the belt longer, tilt the latch plate and pull it along the belt.
Buckle, position, and release it the same way as the lap part of a lap-shoulder belt.
To make the belt shorter, pull its free end as shown until the belt is snug.
If the belt is not long enough, see Safety Belt Extender on page 3‑21.
Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if necessary.
See also:
Setting the Clock
To set the time and date:
1. Turn the ignition key to ACC/ ACCESSORY or ON/RUN, then press
, to turn the radio on.
2. Press
to display HR, MIN, MM, DD, and YYYY (hour, minute, month, day, and yea ...
Shifting out of Park
To shift out of P (Park):
1. Apply the brake pedal.
2. Turn the ignition to ON/RUN.
3. Press the shift lever button.
4. Move the shift lever.
If you still are unable to shift out of P (Park):
1. ...
Vehicle Care
To help keep the vehicle looking like new, vehicle care products are available from your dealer.
For information on how to clean and protect the vehicle’s interior and exterior, see Interior Care o ...