Storing Memory Positions
To save into memory:
1. Adjust the driver seat and seatback recliner, both outside mirrors, and the throttle and brake pedals, if equipped.
See Power Mirrors on page 2‑15 and Adjustable Throttle and Brake Pedal on page 9‑27 for more information.
Not all mirrors and adjustable throttle and brake pedals will have the ability to save and recall their positions.
2. Press and hold “1” until two beeps sound.
3. Repeat for a second driver position using “2.”
To recall, press and release “1” or “2.” The vehicle must be in P (Park).
A single beep will sound. The seat, outside mirrors, and adjustable throttle and brake pedals, if equipped, will move to the position previously stored for the identified driver.
See Memory Seats on page 3‑7 and Vehicle Personalization (With DIC Buttons) on page 5‑52 for more information.
See also:
Cleaning the RSE Overhead Console
When cleaning the RSE overhead console surface, use only a clean cloth dampened with clean water. ...
Installing the Third Row Seats
To reinstall a third row seat:
1. Before installing the seat the seatback must be folded forward. See “Folding the Seatback” earlier in this section.
The seats must be placed in the proper locat ...
Transmission Temperature
Press the trip/fuel button until TRANS TEMP displays. This display shows the temperature of the automatic transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F). ...