Knob Retainer

Floor mats with a knob retainer.

Removing and Replacing the Floor Mat
Removing and Replacing the Floor Mat

1. Turn the knob until it is aligned with the slot in the floor mat grommet.

2. Pull up on the floor mat.

3. Center the slot in the floor mat grommet with the knob on the floor and set into position.

4. Turn the knob until it is perpendicular to the slot in the grommet to lock the mat in place.

5. Make sure the floor mat is properly secured and verify that it does not interfere with the pedals.

    See also:

    Transfer Case Buttons
    The vehicle will have one of these three styles of transfer case controls. Use these controls to shift into and out of the different Four-Wheel Drive modes. Manual Transfer Case This transfer ca ...

    Portable Audio Devices
    Some vehicles have a 3.5 mm (1/8 in) auxiliary input and a USB port located in the center console. External devices such as iPods®, laptop computers, MP3 players, CD changers, and USB storage dev ...

    Engine Cover
    A. Oil Fill Cap B. Engine Cover To remove: 1. Remove the oil fill cap (A). 2. Raise the engine cover (B) to release it from the retainers. 3. Lift and remove the engine cover. 4. Reverse Steps ...