Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the storage compartment on the driver side, at the rear of the vehicle.
1. Press down on the latch tab and pull the cover off to access the storage compartment.
2. Press the two tabs on the quick release buckle to release the tire sealant and compressor kit strap.
3. Remove the sealant and compressor kit from its tray.
To store the tire sealant and compressor kit, reverse the steps.
See also:
Selecting the Alert Timing
The Collision Alert control is on the steering wheel. Press COLLISION ALERT to
set the alert timing to far, medium, near or off. The first button press shows the
current control setting on the D ...
Four-Wheel Drive
Transfer Case
When to Check Lubricant
Refer to Maintenance Schedule on page 11‑3 to determine when to check the lubricant.
How to Check Lubricant
Electric Shift Transfer Case
A. Fill Plug ...
Universal Remote System Programming
This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.
Do not use the Uni ...