Removal and Installation of the Sealant Canister
To remove the sealant canister:
1. Unwrap the sealant hose.
2. Press the canister release button.
3. Pull up and remove the canister.
4. Replace with a new canister which is available from your dealer.
5. Push the new canister into place.
See also:
Range Selection Mode (Allison® Transmission or Hydra-Matic® 6-Speed
Transmission)
The vehicle may have a Range Selection Mode. The Range Selection Mode helps control the vehicle's transmission and vehicle speed while driving down hill or towing a trailer by letting you select a d ...
Safety
Standard safety features include:
Side curtain airbags with rollover sensor
Four-wheel-disc antilock brakes
Electronic stability system with roll-mitigation technology
Rear parking sensors
Backu ...
Ride Control System Messages
SERVICE STABILITRAK
This message displays if there is a problem with the StabiliTrak® system. If this message appears, try to reset the system. Stop; turn off the engine for at least 15 seconds;
th ...





