Tire Rotation
Tires should be rotated every 12 000 km (7,500 mi).
See Maintenance Schedule on page 11‑3.
Tires are rotated to achieve a uniform wear for all tires.
The first rotation is the most important.
Any time unusual wear is noticed, rotate the tires as soon as possible and check the wheel alignment. Also check for damaged tires or wheels.
See When It Is Time for New Tires on page 10‑51 and Wheel Replacement on page 10‑56.

Use this rotation pattern when rotating the tires.
If the vehicle has a compact spare tire, do not include it in the tire rotation.
Adjust the front and rear tires to the recommended inflation pressure on the Tire and Loading Information label after the tires have been rotated.
See Tire Pressure on page 10‑44 and Vehicle Load Limits on page 9‑10.
Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation on page 10‑46.
Check that all wheel nuts are properly tightened. See “Wheel Nut Torque” under Capacities and Specifications on page 12‑2.
WARNING
Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
In an emergency, a cloth or a paper towel can be used;
however, use a scraper or wire brush later to remove all rust or dirt.
Lightly coat the center of the wheel hub with wheel bearing grease after a wheel change or tire rotation to prevent corrosion or rust build-up. Do not get grease on the flat wheel mounting surface or on the wheel nuts or bolts.
Check that the spare tire, if the vehicle has one, is stored properly. Push, pull, and then try to rotate or turn the tire. If it moves, tighten the cable. See Tire Changing on page 10‑68.
See also:
Entry Lighting
The dome lamp, cargo lamp, and foot lamp inside the vehicle come on when any
door is opened, if the dome lamp is in the door position. In addition, these lamps
come on when the Remote Keyless Entr ...
Tow/Haul Mode
Pressing this button at the end of the shift lever turns on and off the Tow/Haul Mode.
This indicator light on the instrument panel cluster comes on when the Tow/Haul Mode is on.
Tow/Haul is a f ...
Radio Messages
Calibration Error: The audio system has been calibrated for the vehicle from the factory.
If Calibration Error displays, it means that the radio has not been configured properly for the vehicle and i ...





