Rear Climate Control System (Rear Climate Control Only)

GMC Acadia / GMC Acadia Owners Manual / Climate Controls / Climate Control Systems / Rear Climate Control System (Rear Climate Control Only)

A. Fan Control

A. Fan Control
B. Temperature Control
C. Air Delivery Mode Control

For vehicles with the rear climate control system, the controls are located on the rear of the center console. The system can also be controlled with the front controls.

Press the REAR button on the front climate control system to turn the rear climate control system on or off. An indicator comes on when the rear system is on. The system also turns on if any of the rear controls are adjusted.

Mimic Mode: This mode matches the rear climate control to the front climate control settings. It comes on when REAR is pressed.

Independent Mode: This mode directs rear seating airflow according to the settings of the rear controls. It comes on when any rear control is adjusted.

Fan Control: Turn clockwise or counterclockwise to increase or decrease the fan speed. Turn the knob to Temperature Control: Turn clockwise or counterclockwise to increase or decrease the airflow temperature. to turn the fan off.

Temperature Control: Turn clockwise or counterclockwise to increase or decrease the airflow temperature.

Air Delivery Mode Control:

Turn to the desired mode to change the airflow direction.

(Bi-Level): Air is directed through the rear floor outlets, as well as the overhead outlets. (Vent): Air is directed through the overhead outlets.

(Floor): Air is directed through the floor outlets. The rear system floor outlets are located under the third row seats. (Bi-Level): Air is directed through the rear floor outlets, as well as the overhead outlets.

Rear Climate Control System (Rear Climate with Rear Seat Audio) (Floor): Air is directed through the floor outlets. The rear system floor outlets are located under the third row seats.

    See also:

    Dual Tire Rotation
    When the vehicle is new, or whenever a wheel, wheel bolt, or wheel nut is replaced, check the wheel nut torque after 160, 1 600, and 10 000 km (100, 1,000, and 6,000 mi) of driving. For proper torque ...

    Securing a Child Restraint Designed for the LATCH System
    WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed ...

    When to Change Engine Oil
    This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and mile ...