Entering the Feature Settings Menu

1. Turn the ignition on and place the vehicle in P (Park).

To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.

2. Press the customization button to enter the feature settings menu.

If the menu is not available, FEATURE SETTINGS AVAILABLE IN PARK will display. Before entering the menu, make sure the vehicle is in P (Park).

    See also:

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. 1500 Series A. Fill Plug B. Drain Plug All Except 1500 Series A. Fill Plug B. Drain Plug • When the differential is c ...

    Fog Lamps
    Fog Lamps For vehicles with fog lamps, the control is located next to the exterior lamps control on the instrument panel, to the left of the steering column. The ignition must be in the ON/RUN pos ...

    Removing the Spare Tire and Tools
    To access the spare tire and tools: 1. Open the liftgate. See Liftgate on page 2‑9. 2. Lift the load floor up. Coin/Pierce Jack with One-Piece Wrench A. Extension B. Wheel Wrench C. Jack ...