Replacing Safety Belt System Parts after a Crash
WARNING
A crash can damage the safety belt system in the vehicle.
A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
After a minor crash, replacement of safety belts may not be necessary.
But the safety belt assemblies that were used during any crash may have been stressed or damaged.
See your dealer to have the safety belt assemblies inspected or replaced.
New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash.
Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light on page 5‑16.
See also:
Engine Compartment Fuse Block
To remove the fuse block cover, squeeze the clips on the cover and lift it straight
up. See Engine Compartment Overview on page 10‑6.
Notice: Spilling liquid on any electrical component on ...
Shifting out of Park
The vehicle is equipped with an electronic shift lock release system.
The shift lock release is designed to:
• Prevent ignition key removal unless the shift lever is in P (Park) with the shift lev ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks. ...