Remote Keyless Entry (RKE) System
See Radio Frequency Statement on page 13‑22 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.
If there is a decrease in the RKE operating range:
• Check the distance. The transmitter may be too far from the vehicle.
• Check the location. Other vehicles or objects may be blocking the signal.
• Check the transmitter's battery. See “Battery Replacement” later in this section.
• If the transmitter is still not working correctly, see your dealer or a qualified technician for service.
See also:
Engine Oil Change
When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system might not indi ...
Using the “Digit Dial” Command
The digit dial command allows a phone number to be dialed by entering the digits one at a time.
After each digit is entered, the system repeats back the digit it heard followed by a tone.
If an unwa ...
Storing and Deleting Phone Numbers
The system can store up to 30 phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems, if equipped.
The following commands are used to delete an ...





