Instrument Panel Fuse Block

The instrument panel fuse block is located on the passenger side panel of the center console. To access the fuses, open the fuse panel door from the passenger side by pulling it out.
To reinstall the door, insert the tabs on the top of the door into the console first, then push the door back into its original location.
The vehicle may not be equipped with all of the fuses, relays, and features shown.
Instrument Panel Fuse Block
See also:
Electronic Range Select (ERS) Mode
ERS or manual mode allows for the selection of the range of gear positions. Use
this mode when driving downhill or towing a trailer to limit the top gear and vehicle
speed. The shift position indi ...
Power Seat Adjustment
To adjust a power seat, if equipped:
• Move the seat forward or rearward by sliding the control forward or rearward.
• If available, raise or lower the front or rear part of the seat cushion b ...
Extended Cab
On vehicles with a sunroof, the sunroof only operates when the ignition is in the ACC/ACCESSORY or ON/RUN or the Retained Accessory Power (RAP) is active.
See Retained Accessory Power (RAP) on page ...





