Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.
○ The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
○ The ignition key should come out only in LOCK/OFF.
Contact your dealer if service is required.
See also:
Erasing Universal Home Remote Buttons
The programmed buttons should be erased when the vehicle is sold or the lease ends.
To erase either Rolling Code or Fixed Code settings on the Universal Home Remote device:
1. Press and hold the two ...
Power Door Locks
If available, the switches are on the front doors.
: Press to unlock the doors.
: Press to lock the doors. ...
When the System Does Not Seem To Work Properly
The rear vision camera system might not work properly or display a clear image if:
• The RVC is turned off.
See “Turning the Rear Camera System On or Off” earlier in this section.
• It is d ...